FE Analysis of Foundations
Fe Analysis Of Foundations Overview
The foundation system is modelled in the Graphic Editor and can comprise of mats, piled rafts, pads, pile caps and strip footings. All of these…
Category: Loading & Analysis
FE Analysis of Foundations
Raft Foundation And Piled Raft Foundation Analysis Design Example
Raft Foundation Example This example is based on the "Quick Start Guide Concrete Complete" model which is automatically installed in the default ProtaDataXXXX folder. In…
FE Analysis of Foundations
Punching Shear Check For Raft Foundation
Raft Foundation Punching Shear Check Scope & Limitation The scope of the punching shear check for raft foundation are : Punching shear check can be…
FE Analysis of Foundations
Finite Elements Raft Foundation Analysis Ps2022
FE Raft Foundation Analysis is only available at the foundation storey (ST-00). It can be accessed by clicking “ FE Raft Foundation Analysis” from the…
Building Analysis
How To Check Singularity Or Large Deformation Warnings During Building Analysis
It’s very important to know how to check the validity of the model especially if there are errors or warning messages appearing during building analysis.…
Building Analysis
Detailed Design Diagram Ps 2022
Introduction Member analysis results for can be viewed in Detail Design Diagram after running the Building Analysis. Forces such as moment, axial loading, torsion, shear and etc.…
Building Analysis
Staged Construction Analysis
Introduction Staged construction analysis is a sophisticated method of solution which, if used with a reasonable degree of care can more closely reflect the real…
Building Analysis
Building Model Check
The building model check will check for possible modelling errors or mistakes. It is highly recommended to perform "Building Model Check" progressively when building the…
Building Analysis
Axial Load Comparison Report Example
Tutorial video of this topic is available at ProtaStructure 2025 Basic E-Learning: 14 Building Analysis, Axial Load Comparison Report A simple model can be created for…
Building Analysis
What Is Merge Fe Column Beam Results With Example Ps 2022
How to merge the results from sub-frame FE floor analysis and results from the 3D building analysis? After a model is completed, a building analysis…