The nature of the design code requirements tend to dictate that punching shear checks cannot be safely & fully automated in batch runs. For this…
ASCE/SEI 41-17—“Seismic Evaluation and Retrofit of Existing Buildings”—is the industry standard for assessing seismic performance in existing structures. Moreover, it uses performance-based design principles. Consequently,…
ProtaStructure supports a powerful composite slab/beam design. The overview of the composite slab modeling, analysis, and design is as follows: 1. Metal decks can be chosen…
An essential feature in the latest release of ProtaStructure is the design of formworks. Refer to this article for the design guide and the scope…
This document represents the analysis steps of the slab members according to TBDY 2018 Section 7.11 that should be checked in ProtaStructure under the impact…
In ProtaStructure, effective stiffness modifiers of the slabs could be adjusted for different analysis methods. One of the method is using the “Finite Elements Floor Analysis”…
Scope ProtaStructure can automatically generate the load combinations as required by different design codes. To generate load combinations automatically use the Loading Generator under Analysis…
ProtaStructure Rib & Waffle Slab Loads Design Guide document is attached. Downloads ProtaStructure_Rib_Waffle_Slab_Loads_Design_Guide (0.5 MB)
This design guide discusses the Column Design to Eurocode 2 Design Code BS EN 1992-1-1:2004. The topics covered in this design guide are: Braced Square…
For 2021 and prior versions, Beam-Column Joint Shear Design and Strong Column Weak Beam condition checks were given in the same report which is Post-Analysis Design Checks Report. With…
The Prota wheel