Post Analysis Ps 2022
Physical Model vs Analytical Model The 3D model you built is a physical model with actual member size rendered visually. The analysis converts the physical model…
Physical Model vs Analytical Model The 3D model you built is a physical model with actual member size rendered visually. The analysis converts the physical model…
Automatic Assessment of Sway Sensitivity Sway sensitivity is automatically determined in ProtaStructure when the design code is set to EC2. For other codes as discussed below, an…
Introduction During modelling structures, there may be situation where the beams insertion point is offset from columns insertion point. In other words, the beam end…
Having modeled your structure and defined the parameters/loading to be applied, you are now ready to generate the member design forces. These are determined by…
For flat slab or transfer slab models, the slab will always be meshed to the perimeter outline of the column. There are 2 options how…
In order to consider concrete cracks that can be formed in the intersections, rigid zones may be reduced by a certain amount to calculate more…
This article explains the differences between Building Analysis and FE Floor Analysis & which method is suited for different structural system. The fundamental differences of…
Having modeled your structure and defined the parameters / loading to be applied, you are now ready to perform 3D building analysis of the whole…
Summary Understanding Transfer Beam Analysis in ProtaStructure This document explains how ProtaStructure transfer beam analysis enables engineers to model and analyze transfer beams using advanced…
Summary Advancing Beam Analysis: A Unified Approach Integrated Beam Analysis improves upon traditional methods where continuous beam lines are analyzed and designed in isolation. Engineers often rely on…